Warren County Water System

PWSID: NC0293015

No active violations
This system has no unresolved violations. The most recent violation on record was 2018-04-22.

This system has more violations on record than 78% of water systems in North Carolina.

Violation trend: 0.0 per year over the last 5 years, down from 0.6 per year in the previous 5.

System Details

Population Served9,654
Service Connections4,915
Water SourceSurface Water Purchased
System TypeCommunity Water System
OwnerLocal Government
StatusActive
CityWarrenton
EPA ZIP on File27589

Areas Served

  • Warrenton, Warren County

Lead & Copper Testing

ContaminantLevelEPA Action LevelStatus
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level

Violation History (15 total)

ContaminantViolationDateHealth-BasedStatus
7500Other2018-04-22Returned to Compliance
2950MR2016-12-01 MajorReturned to Compliance
2456MR2016-12-01 MajorReturned to Compliance
2950MCL
Measured: 0.0820 MG/L (limit: 0.0800 MG/L)
2015-01-01YesReturned to Compliance
2950MCL
Measured: 0.0810 MG/L (limit: 0.0800 MG/L)
2014-10-01YesReturned to Compliance
2950MR2013-10-01 MajorReturned to Compliance
1094MR2011-01-01 MajorReturned to Compliance
7000Other2010-07-01Returned to Compliance
0600MR2010-01-02Returned to Compliance
7500Other2009-11-30Returned to Compliance
7500Other2009-05-30Returned to Compliance
7500Other2008-08-22Returned to Compliance
5000MR2007-10-01Returned to Compliance
7000Other2006-10-02Returned to Compliance
7000Other2005-07-01Returned to Compliance

Understanding This Water System's Record

Warren County Water System is a community water system water system that draws from surface water purchased sources and serves a population of 9,654 in Warrenton, North Carolina. This page shows its complete compliance history as reported to the EPA's Safe Drinking Water Information System (SDWIS), the federal database that tracks every public water system in the United States.

What Do These Violations Mean?

Health-based violations mean the system exceeded an EPA maximum contaminant level (MCL) or failed to provide required treatment. These indicate potential health risks from contaminants like lead, arsenic, bacteria, nitrates, or disinfection byproducts. Non-health-based violations involve monitoring, reporting, or procedural requirements — the system missed a testing deadline or failed to notify customers, but contaminant levels were not necessarily unsafe.

What Should You Do?

Your water utility is required to publish an annual Consumer Confidence Report (CCR) that details test results and any violations. If your system has active health-based violations, consider a certified water filter rated for the specific contaminants involved. The contaminant guides on this site explain health risks and filter options for common pollutants. For the most current results, contact your water utility directly — EPA data can lag weeks or months behind real-time testing.