Ringgold

PWSID: GA0470002

No active violations
This system has no unresolved violations. The most recent violation on record was 2024-01-01.

This system has more violations on record than 87% of water systems in Georgia.

Violation trend: 2.8 per year over the last 5 years, up from 1.2 per year in the previous 5.

System Details

Population Served2,743
Service Connections1,281
Water SourceSurface Water
System TypeCommunity Water System
OwnerLocal Government
StatusActive
CityRinggold
EPA ZIP on File30736

Areas Served

  • Ringgold, Catoosa County

Lead & Copper Testing

ContaminantLevelEPA Action LevelStatus
Lead (90th percentile)0.0070 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0070 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0025 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0025 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0012 mg/L0.015 mg/LBelow Action Level

Violation History (25 total)

ContaminantViolationDateHealth-BasedStatus
2456MCL
Measured: 0.0620 MG/L (limit: 0.0600 MG/L)
2024-01-01YesReturned to Compliance
2456MCL
Measured: 0.0620 MG/L (limit: 0.0600 MG/L)
2024-01-01YesAcknowledged
2456MCL
Measured: 0.0620 MG/L (limit: 0.0600 MG/L)
2024-01-01YesReturned to Compliance
2456MCL
Measured: 0.0630 MG/L (limit: 0.0600 MG/L)
2023-10-01YesReturned to Compliance
2456MCL
Measured: 0.0630 MG/L (limit: 0.0600 MG/L)
2023-10-01YesAcknowledged
2456MCL
Measured: 0.0630 MG/L (limit: 0.0600 MG/L)
2023-10-01YesAcknowledged
2456MCL
Measured: 0.0630 MG/L (limit: 0.0600 MG/L)
2023-10-01YesReturned to Compliance
2456MCL
Measured: 0.0640 MG/L (limit: 0.0600 MG/L)
2023-07-01YesReturned to Compliance
2456MCL
Measured: 0.0640 MG/L (limit: 0.0600 MG/L)
2023-07-01YesAcknowledged
2456MCL
Measured: 0.0640 MG/L (limit: 0.0600 MG/L)
2023-07-01YesAcknowledged
2456MCL
Measured: 0.0640 MG/L (limit: 0.0600 MG/L)
2023-07-01YesReturned to Compliance
5000MR2022-10-01Returned to Compliance
5000MR2022-10-01Returned to Compliance
5000MR2022-10-01Returned to Compliance
2456MCL
Measured: 0.0650 MG/L (limit: 0.0600 MG/L)
2021-01-01YesReturned to Compliance
2456MCL
Measured: 0.0650 MG/L (limit: 0.0600 MG/L)
2020-10-01YesReturned to Compliance
2456MCL
Measured: 0.0710 MG/L (limit: 0.0600 MG/L)
2020-07-01YesReturned to Compliance
2456MCL
Measured: 0.0760 MG/L (limit: 0.0600 MG/L)
2020-04-01YesReturned to Compliance
2456MCL
Measured: 0.0650 MG/L (limit: 0.0600 MG/L)
2017-07-01YesReturned to Compliance
2456MCL
Measured: 0.0630 MG/L (limit: 0.0600 MG/L)
2017-04-01YesReturned to Compliance
7000Other2010-07-01Returned to Compliance
7000Other2004-07-01Returned to Compliance
7000Other2003-07-01Returned to Compliance
7000Other2002-07-01Returned to Compliance
7000Other2001-07-01Returned to Compliance

Understanding This Water System's Record

Ringgold is a community water system water system that draws from surface water sources and serves a population of 2,743 in Ringgold, Georgia. This page shows its complete compliance history as reported to the EPA's Safe Drinking Water Information System (SDWIS), the federal database that tracks every public water system in the United States.

What Do These Violations Mean?

Health-based violations mean the system exceeded an EPA maximum contaminant level (MCL) or failed to provide required treatment. These indicate potential health risks from contaminants like lead, arsenic, bacteria, nitrates, or disinfection byproducts. Non-health-based violations involve monitoring, reporting, or procedural requirements — the system missed a testing deadline or failed to notify customers, but contaminant levels were not necessarily unsafe.

What Should You Do?

Your water utility is required to publish an annual Consumer Confidence Report (CCR) that details test results and any violations. If your system has active health-based violations, consider a certified water filter rated for the specific contaminants involved. The contaminant guides on this site explain health risks and filter options for common pollutants. For the most current results, contact your water utility directly — EPA data can lag weeks or months behind real-time testing.