Old Farm Hill Water District

PWSID: NY5903485

No active violations
This system has no unresolved violations. The most recent violation on record was 2022-07-01.

This system has more violations on record than 61% of water systems in New York.

Violation trend: 1.6 per year over the last 5 years, up from 0.8 per year in the previous 5.

System Details

Population Served1,768
Service Connections505
Water SourceSurface Water Purchased
System TypeCommunity Water System
OwnerLocal Government
StatusActive
CityValhalla
EPA ZIP on File10595

Areas Served

  • Westchester County

Lead & Copper Testing

ContaminantLevelEPA Action LevelStatus
Lead (90th percentile)0.0027 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0018 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0015 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level

Violation History (12 total)

ContaminantViolationDateHealth-BasedStatus
2456MCL
Measured: 0.0630 MG/L (limit: 0.0600 MG/L)
2022-07-01YesAcknowledged
2456MCL
Measured: 0.0630 MG/L (limit: 0.0600 MG/L)
2022-07-01YesAcknowledged
2456MCL
Measured: 0.0734 MG/L (limit: 0.0600 MG/L)
2022-04-01YesAcknowledged
2456MCL
Measured: 0.0734 MG/L (limit: 0.0600 MG/L)
2022-04-01YesAcknowledged
2456MCL
Measured: 0.0680 MG/L (limit: 0.0600 MG/L)
2022-01-01YesAcknowledged
2456MCL
Measured: 0.0680 MG/L (limit: 0.0600 MG/L)
2022-01-01YesReturned to Compliance
2456MCL
Measured: 0.0710 MG/L (limit: 0.0600 MG/L)
2021-10-01YesAcknowledged
2456MCL
Measured: 0.0710 MG/L (limit: 0.0600 MG/L)
2021-10-01YesReturned to Compliance
2456MCL
Measured: 60.64 UG/L (limit: 60.00 UG/L)
2019-01-01YesReturned to Compliance
8000MON2017-07-01Acknowledged
0200MR2016-10-01Returned to Compliance
0200MR2016-10-01Returned to Compliance

Understanding This Water System's Record

Old Farm Hill Water District is a community water system water system that draws from surface water purchased sources and serves a population of 1,768 in Valhalla, New York. This page shows its complete compliance history as reported to the EPA's Safe Drinking Water Information System (SDWIS), the federal database that tracks every public water system in the United States.

What Do These Violations Mean?

Health-based violations mean the system exceeded an EPA maximum contaminant level (MCL) or failed to provide required treatment. These indicate potential health risks from contaminants like lead, arsenic, bacteria, nitrates, or disinfection byproducts. Non-health-based violations involve monitoring, reporting, or procedural requirements — the system missed a testing deadline or failed to notify customers, but contaminant levels were not necessarily unsafe.

What Should You Do?

Your water utility is required to publish an annual Consumer Confidence Report (CCR) that details test results and any violations. If your system has active health-based violations, consider a certified water filter rated for the specific contaminants involved. The contaminant guides on this site explain health risks and filter options for common pollutants. For the most current results, contact your water utility directly — EPA data can lag weeks or months behind real-time testing.