Lake Como Water Dept

PWSID: NJ1347001

No active violations
This system has no unresolved violations. The most recent violation on record was 2023-06-01.

This system has more violations on record than 72% of water systems in New Jersey.

Violation trend: 0.4 per year over the last 5 years, down from 2.6 per year in the previous 5.

System Details

Population Served3,000
Service Connections1,084
Water SourceSurface Water Purchased
System TypeCommunity Water System
OwnerLocal Government
StatusActive
CityLake Como
EPA ZIP on File07719

Areas Served

  • Monmouth County

Lead & Copper Testing

ContaminantLevelEPA Action LevelStatus
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level

Violation History (15 total)

ContaminantViolationDateHealth-BasedStatus
0200MR2023-06-01 MajorAcknowledged
0999MR2023-04-01 MajorAcknowledged
7500Other2019-11-01Returned to Compliance
7500Other2019-10-14Returned to Compliance
2950MCL
Measured: 0.0810 MG/L (limit: 0.0800 MG/L)
2019-07-01YesReturned to Compliance
7500Other2019-06-25Returned to Compliance
2950MCL
Measured: 0.0830 MG/L (limit: 0.0800 MG/L)
2019-04-01YesReturned to Compliance
2950MR2019-03-05Returned to Compliance
2950MCL
Measured: 0.0840 MG/L (limit: 0.0800 MG/L)
2019-01-01YesReturned to Compliance
0200MR2018-11-01Returned to Compliance
5000MR2018-10-01Returned to Compliance
2950MCL
Measured: 0.0850 MG/L (limit: 0.0800 MG/L)
2018-10-01YesReturned to Compliance
8000RPT2018-09-11Returned to Compliance
0200MR2018-08-01 MajorReturned to Compliance
0200MR2018-07-01 MajorReturned to Compliance

Understanding This Water System's Record

Lake Como Water Dept is a community water system water system that draws from surface water purchased sources and serves a population of 3,000 in Lake Como, New Jersey. This page shows its complete compliance history as reported to the EPA's Safe Drinking Water Information System (SDWIS), the federal database that tracks every public water system in the United States.

What Do These Violations Mean?

Health-based violations mean the system exceeded an EPA maximum contaminant level (MCL) or failed to provide required treatment. These indicate potential health risks from contaminants like lead, arsenic, bacteria, nitrates, or disinfection byproducts. Non-health-based violations involve monitoring, reporting, or procedural requirements — the system missed a testing deadline or failed to notify customers, but contaminant levels were not necessarily unsafe.

What Should You Do?

Your water utility is required to publish an annual Consumer Confidence Report (CCR) that details test results and any violations. If your system has active health-based violations, consider a certified water filter rated for the specific contaminants involved. The contaminant guides on this site explain health risks and filter options for common pollutants. For the most current results, contact your water utility directly — EPA data can lag weeks or months behind real-time testing.