High Ridge

PWSID: WA53AB327

No active violations
This system has no unresolved violations. The most recent violation on record was 2019-10-01.

This system has more violations on record than 84% of water systems in Washington.

Violation trend: 0.0 per year over the last 5 years, down from 4.0 per year in the previous 5.

System Details

Population Served73
Service Connections29
Water SourceGroundwater
System TypeCommunity Water System
OwnerPrivate
StatusActive
CityPort Orchard
EPA ZIP on File98366

Lead & Copper Testing

ContaminantLevelEPA Action LevelStatus
Lead (90th percentile)0.0025 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0015 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0010 mg/L0.015 mg/LBelow Action Level

Violation History (20 total)

ContaminantViolationDateHealth-BasedStatus
2005MR2019-10-01 MajorReturned to Compliance
2010MR2019-10-01 MajorReturned to Compliance
2015MR2019-10-01 MajorReturned to Compliance
2020MR2019-10-01 MajorReturned to Compliance
2035MR2019-10-01 MajorReturned to Compliance
2037MR2019-10-01 MajorReturned to Compliance
2039MR2019-10-01 MajorReturned to Compliance
2042MR2019-10-01 MajorReturned to Compliance
2045MR2019-10-01 MajorReturned to Compliance
2050MR2019-10-01 MajorReturned to Compliance
2051MR2019-10-01 MajorReturned to Compliance
2065MR2019-10-01 MajorReturned to Compliance
2067MR2019-10-01 MajorReturned to Compliance
2070MR2019-10-01 MajorReturned to Compliance
2076MR2019-10-01 MajorReturned to Compliance
2077MR2019-10-01 MajorReturned to Compliance
2274MR2019-10-01 MajorReturned to Compliance
2306MR2019-10-01 MajorReturned to Compliance
2595MR2019-10-01 MajorReturned to Compliance
2959MR2019-10-01 MajorReturned to Compliance

Understanding This Water System's Record

High Ridge is a community water system water system that draws from groundwater sources and serves a population of 73 in Port Orchard, Washington. This page shows its complete compliance history as reported to the EPA's Safe Drinking Water Information System (SDWIS), the federal database that tracks every public water system in the United States.

What Do These Violations Mean?

Health-based violations mean the system exceeded an EPA maximum contaminant level (MCL) or failed to provide required treatment. These indicate potential health risks from contaminants like lead, arsenic, bacteria, nitrates, or disinfection byproducts. Non-health-based violations involve monitoring, reporting, or procedural requirements — the system missed a testing deadline or failed to notify customers, but contaminant levels were not necessarily unsafe.

What Should You Do?

Your water utility is required to publish an annual Consumer Confidence Report (CCR) that details test results and any violations. If your system has active health-based violations, consider a certified water filter rated for the specific contaminants involved. The contaminant guides on this site explain health risks and filter options for common pollutants. For the most current results, contact your water utility directly — EPA data can lag weeks or months behind real-time testing.