Gladeville Utility District

PWSID: TN0000264

1 active violation (non-health-based)
This system has unresolved violations related to monitoring, reporting, or procedural requirements, but none involve contaminant levels exceeding EPA health limits.

This system has more violations on record than 78% of water systems in Tennessee.

Violation trend: 0.2 per year over the last 5 years, down from 1.4 per year in the previous 5.

System Details

Population Served19,813
Service Connections7,338
Water SourceGroundwater Under Influence
System TypeCommunity Water System
OwnerLocal Government
StatusActive
CityGladeville
EPA ZIP on File37090-0846

Areas Served

  • Lebanon, Wilson County

Lead & Copper Testing

ContaminantLevelEPA Action LevelStatus
Lead (90th percentile)0.0075 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0011 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0010 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0010 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0010 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0010 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0005 mg/L0.015 mg/LBelow Action Level

1 Active Violations

ContaminantViolationDateHealth-BasedStatus
7500Other2018-02-01Open

Violation History (8 total)

ContaminantViolationDateHealth-BasedStatus
5000Other2021-06-01Acknowledged
2456MCL
Measured: 0.0615 MG/L (EPA limit: 0.060 mg/L)
2020-10-01YesReturned to Compliance
2456MCL
Measured: 0.0630 MG/L (EPA limit: 0.060 mg/L)
2020-07-01YesReturned to Compliance
3015MR2017-01-01 MajorReturned to Compliance
3015MR2016-12-01 MajorReturned to Compliance
3015MR2016-11-01 MajorReturned to Compliance
3015MR2016-10-01 MajorReturned to Compliance

Understanding This Water System's Record

Gladeville Utility District is a community water system water system that draws from groundwater under influence sources and serves a population of 19,813 in Gladeville, Tennessee. This page shows its complete compliance history as reported to the EPA's Safe Drinking Water Information System (SDWIS), the federal database that tracks every public water system in the United States.

What Do These Violations Mean?

Health-based violations mean the system exceeded an EPA maximum contaminant level (MCL) or failed to provide required treatment. These indicate potential health risks from contaminants like lead, arsenic, bacteria, nitrates, or disinfection byproducts. Non-health-based violations involve monitoring, reporting, or procedural requirements — the system missed a testing deadline or failed to notify customers, but contaminant levels were not necessarily unsafe.

What Should You Do?

Your water utility is required to publish an annual Consumer Confidence Report (CCR) that details test results and any violations. If your system has active health-based violations, consider a certified water filter rated for the specific contaminants involved. The contaminant guides on this site explain health risks and filter options for common pollutants. For the most current results, contact your water utility directly — EPA data can lag weeks or months behind real-time testing.