Flying J No 572

PWSID: IA4070204

No active violations
This system has no unresolved violations. The most recent violation on record was 2023-08-01.

This system has more violations on record than 65% of water systems in Ohio.

Violation trend: 0.8 per year over the last 5 years, up from 0.2 per year in the previous 5.

System Details

Population Served1,892
Service Connections1
Water SourceGroundwater
System TypeNon-Transient Non-Community
OwnerPrivate
StatusActive
CityMcclure
EPA ZIP on File43534

Areas Served

  • Williams, Hamilton County

Lead & Copper Testing

ContaminantLevelEPA Action LevelStatus
Copper (90th percentile)2.3000 mg/L1.300 mg/LExceeds Action Level
Copper (90th percentile)1.4000 mg/L1.300 mg/LExceeds Action Level
Lead (90th percentile)0.0600 mg/L0.015 mg/LExceeds Action Level
Lead (90th percentile)0.0060 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0030 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0020 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level
Lead (90th percentile)0.0000 mg/L0.015 mg/LBelow Action Level

Violation History (5 total)

ContaminantViolationDateHealth-BasedStatus
2950MR2023-08-01 MajorAcknowledged
2950MR2023-08-01 MajorAcknowledged
2456MR2023-08-01 MajorAcknowledged
2456MR2023-08-01 MajorAcknowledged
Unknown ContaminantOther2021-03-01Returned to Compliance

Understanding This Water System's Record

Flying J No 572 is a non-transient non-community water system that draws from groundwater sources and serves a population of 1,892 in Mcclure, Ohio. This page shows its complete compliance history as reported to the EPA's Safe Drinking Water Information System (SDWIS), the federal database that tracks every public water system in the United States.

What Do These Violations Mean?

Health-based violations mean the system exceeded an EPA maximum contaminant level (MCL) or failed to provide required treatment. These indicate potential health risks from contaminants like lead, arsenic, bacteria, nitrates, or disinfection byproducts. Non-health-based violations involve monitoring, reporting, or procedural requirements — the system missed a testing deadline or failed to notify customers, but contaminant levels were not necessarily unsafe.

What Should You Do?

Your water utility is required to publish an annual Consumer Confidence Report (CCR) that details test results and any violations. If your system has active health-based violations, consider a certified water filter rated for the specific contaminants involved. The contaminant guides on this site explain health risks and filter options for common pollutants. For the most current results, contact your water utility directly — EPA data can lag weeks or months behind real-time testing.