City of Milford
PWSID: KS2006109
This system has no unresolved violations. The most recent violation on record was 2016-11-05.
This system has more violations on record than 73% of water systems in Kansas.
Violation trend: 0.0 per year over the last 5 years, down from 1.0 per year in the previous 5.
System Details
| Population Served | 400 |
| Service Connections | 186 |
| Water Source | Groundwater Purchased |
| System Type | Community Water System |
| Owner | Local Government |
| Status | Active |
| City | Milford |
| EPA ZIP on File | 66514-0279 |
Areas Served
- Milford, Geary County
Lead & Copper Testing
| Contaminant | Level | EPA Action Level | Status |
|---|---|---|---|
| Lead (90th percentile) | 0.0120 mg/L | 0.015 mg/L | Below Action Level |
| Lead (90th percentile) | 0.0041 mg/L | 0.015 mg/L | Below Action Level |
| Lead (90th percentile) | 0.0024 mg/L | 0.015 mg/L | Below Action Level |
Violation History (21 total)
| Contaminant | Violation | Date | Health-Based | Status |
|---|---|---|---|---|
| 7500 | Other | 2016-11-05 | Returned to Compliance | |
| 2950 | MCL Measured: 0.0920 MG/L (limit: 0.0800 MG/L) | 2016-10-01 | Yes | Returned to Compliance |
| 0700 | TT | 2016-09-16 | Yes | Returned to Compliance |
| 2950 | MCL Measured: 0.1240 MG/L (limit: 0.0800 MG/L) | 2016-07-01 | Yes | Returned to Compliance |
| 0700 | Other | 2016-06-18 | Returned to Compliance | |
| 2950 | MCL Measured: 0.1390 MG/L (limit: 0.0800 MG/L) | 2016-04-01 | Yes | Returned to Compliance |
| 2950 | MCL Measured: 0.1750 MG/L (limit: 0.0800 MG/L) | 2016-01-01 | Yes | Returned to Compliance |
| 2456 | MCL Measured: 0.0630 MG/L (limit: 0.0600 MG/L) | 2015-10-01 | Yes | Returned to Compliance |
| 2950 | MCL Measured: 0.1780 MG/L (limit: 0.0800 MG/L) | 2015-10-01 | Yes | Returned to Compliance |
| 7500 | Other | 2015-08-21 | Returned to Compliance | |
| 7500 | Other | 2015-08-21 | Returned to Compliance | |
| 2456 | MCL Measured: 0.0770 MG/L (limit: 0.0600 MG/L) | 2015-07-01 | Yes | Returned to Compliance |
| 2950 | MCL Measured: 0.1700 MG/L (limit: 0.0800 MG/L) | 2015-07-01 | Yes | Returned to Compliance |
| 2456 | MCL Measured: 0.0790 MG/L (limit: 0.0600 MG/L) | 2015-04-01 | Yes | Returned to Compliance |
| 2950 | MCL Measured: 0.1500 MG/L (limit: 0.0800 MG/L) | 2015-04-01 | Yes | Returned to Compliance |
| 2456 | MCL Measured: 0.0610 MG/L (limit: 0.0600 MG/L) | 2015-01-01 | Yes | Returned to Compliance |
| 2950 | MCL Measured: 0.1000 MG/L (limit: 0.0800 MG/L) | 2015-01-01 | Yes | Returned to Compliance |
| 7500 | Other | 2007-08-01 | Returned to Compliance | |
| 7000 | Other | 2006-07-01 | Returned to Compliance | |
| 7000 | Other | 2005-07-01 | Returned to Compliance | |
| 7000 | Other | 2000-07-01 | Returned to Compliance |
Understanding This Water System's Record
City of Milford is a community water system water system that draws from groundwater purchased sources and serves a population of 400 in Milford, Kansas. This page shows its complete compliance history as reported to the EPA's Safe Drinking Water Information System (SDWIS), the federal database that tracks every public water system in the United States.
What Do These Violations Mean?
Health-based violations mean the system exceeded an EPA maximum contaminant level (MCL) or failed to provide required treatment. These indicate potential health risks from contaminants like lead, arsenic, bacteria, nitrates, or disinfection byproducts. Non-health-based violations involve monitoring, reporting, or procedural requirements — the system missed a testing deadline or failed to notify customers, but contaminant levels were not necessarily unsafe.
What Should You Do?
Your water utility is required to publish an annual Consumer Confidence Report (CCR) that details test results and any violations. If your system has active health-based violations, consider a certified water filter rated for the specific contaminants involved. The contaminant guides on this site explain health risks and filter options for common pollutants. For the most current results, contact your water utility directly — EPA data can lag weeks or months behind real-time testing.