Community Water System · PWSID MO1010061

Belton Pws

Serves 23,598 peopleSurface Water PurchasedOwner: Local GovernmentBelton, Missouri
Nothing open that measures the water, but 1 open testing or paperwork violation.

A missed test is not evidence of bad water. It also is not evidence of good water: for that period nobody checked.

On record since 2006: 3 violations. 1 missed or late test · 2 notices or reports. Most recent began 2025-07-01.

None of them is a measurement of contaminated water.

For this year's test results, ask the utility for its annual Consumer Confidence Report. Every community system must publish one.

0Over the limit
0Treatment lapse
1Missed or late test
2Notice or report1 open

More violations on record than 36% of active water systems in Missouri. Small systems with no staff chemist often rack up missed-test violations; big utilities rarely do.

The record, year by year

20052006 · Notice or report: 12010201520202025 · Missed or late test: 12025 · Notice or report: 12025
One square = one violation, by the year it began. Empty columns are years with nothing on EPA's record.
33% missed or late test · 167% notice or report · 2

Across Missouri, 54% of violations are missed or late tests and 8% are water over a limit.

Lead & copper at the tap

Utilities sample taps in homes most likely to have lead pipes, and report the 90th-percentile result: 9 in 10 homes sampled came in at or below this number. Above the red line (the action level) the utility must act. The action level is not a safe level; EPA's health goal for lead is zero. EPA's file does not date these results, so they are shown highest first.

Lead, 90th percentile 8 results on file · action level 15 ppb

2.2 ppb
1.4 ppb
1.4 ppb
1.3 ppb
0 ppb
0 ppb
0 ppb
0 ppb

Open now (1)

  1. 2025-07-01Consumer Confidence RuleCCR Complete Failure to ReportOpen

Every violation on record

  1. 2025-07-01Consumer Confidence RuleCCR Complete Failure to ReportOpen
  2. 2025-01-01Revised Total Coliform RuleMONBack in compliance
  3. 2006-07-01Consumer Confidence RuleCCR Inadequate ReportingBack in compliance

System details

Population served23,598
Service connections9,007
Water sourceSurface Water Purchased
System typeCommunity Water System
OwnerLocal Government
StatusActive
CityBelton
EPA ZIP on file64012-0000

Areas served

  • Belton, Cass County

Reading this record

Belton Pws is a community water system that draws from surface water purchased and serves about 23,598 people in Belton, Missouri. Everything above comes from the EPA's Safe Drinking Water Information System (SDWIS), where states report every violation by every public water system.

Four kinds of violation. Only one is a measurement of the water: over the limit means a test came back above a legal maximum (an MCL). A treatment lapse means a required protective step was not done, such as disinfection, filtration, fixing a defect an inspector found, or filing a lead-pipe inventory. A missed or late test means a required test was skipped or never reported. That is the most common kind, and the most misread: it does not mean the water was bad, and it does not mean the water was fine. Notices and reports covers public notices and the annual Consumer Confidence Report.

Status. “Back in compliance” means the state recorded a return to compliance. “Period ended” means the violation's compliance period is over but no return to compliance was ever filed, which is common in older records. EPA's federal copy lags state records by months, so call the utility for anything current.